CPCI-354-14821 - Condor CPCI-354-14821 Power Supply - 115-230V(~), 6.3A , 47-63Hz 350W...
Request Quote
For Price
- Part Number:
- CPCI-354-14821
- Model Number:
- CPCI-354-14821
- Make:
- CONDOR
- Lead Time:
- Available
- Qty In Stock:
- Available
Condor CPCI-354-14821 Power Supply - 115-230V(~), 6.3A , 47-63Hz 350W Hot Swap Simple Type: Power Supply
The CPCI series (ac input) and DPCI series (dc input) are highly reliable power supplies for CompactPCI systems, which are increasingly used in communications, industrial, military/aerospace, and other applications. These power supplies offer high power density in plug-in modules that meet the requirements of the PICMG® power interface specification for CompactPCI systems.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 150 W and 200 W in 3U x 8HP, 350 W in 6U x 8HP
- 48 Vdc input versions
- CompactPCI package requires only 15 cfm of external cooling air
- Current sharing and internal OR-ing diodes for N+1 redundancy
- Fully compliant with PICMG CompactPCI specifications
- High current 5 V and 3.3 V outputs
- Universal ac input versions with power factor correction
Specifications
- AC INPUT: 90-264 Vac continuous range, 47 to 63 Hz.
- EFFICIENCY: 70% typical
- HOLDUP TIME: 16 ms minimum after removal of power at full load. 10 ms minimum for CPCI 200s.
- LINE & LOAD REGULATION: ± 2% over input range and 0 to 100% load change.
- OVERLOAD PROTECTION: All outputs are protected against overload and short circuit, Automatic recovery upon removal of fault.
- OVERVOLTAGE PROTECTION(Outputs #1 and #2): Protects load against power supply induced overvoltage. Trip-point is factory set so that output voltage cannot exceed 136% of nominal. Input power must be recycled to reset.
- POWER FACTOR: 0.99 typical at full load. Meets EN61000-3-2.
- REMOTE SENSE: Open sense lead protection
- RIPPLE & NOISE: 1% p-p or 50 mV, whichever is greater. Measured at mating connector with 20 µF
- STABILITY: 0.1% over 8 hours after 30 minutes warm-up.
- TEMPERATURE COEFFICIENT(Outputs #1 and 2): 0.03% per degree centigrade
- TRANSIENT RESPONSE(Outputs #1 and 2): Output voltage returns to within 1% in less than 1 ms for a 50% load change. Peak transient does not exceed 5%.
Applications
- None Available
Aliases
- None Available